2018 Toyota RAV4 Sway Bar Bushings
6 OEM sway bar bushings fit the 2018 Toyota RAV4. Each part page lists verified Chinese manufacturers with FOB prices, MOQ and lead times — send one inquiry to collect quotes.
| OEM | Part | Fitment |
|---|---|---|
| 48815-0R070 | Stabilizer Bar Bushing | Driver Side |
| 48815-48090 | Stabilizer Bar Bushing | Driver Side |
| 48815-0R080 | Stabilizer Bar Bushing | Passenger Side |
| 48815-48080 | Stabilizer Bar Bushing | Passenger Side |
| 48818-0R030 | Stabilizer Bar Bushing | Rear |
| 48818-42020 | Stabilizer Bar Bushing | Rear |
More 2018 Toyota RAV4 parts
Brake Rotors (6)A/C Hoses (9)Wheel Bearings (7)Brake Pads (5)Brake Calipers (10)ABS Speed Sensors (6)Master Cylinders (5)Brake Boosters (4)Shock Absorbers (5)Control Arms (5)CV Boots (7)Sway Bar Links (4)Caliper Brackets (8)Air Filters (3)Ball Joints (3)Water Pumps (4)Engine Coolant Thermostats (5)Alternators (4)Drive Belts (4)Spark Plugs (3)CV Axles (13)Tie Rod Ends (4)Cabin Air Filters (3)A/C Condensers (3)A/C Compressors (4)A/C Evaporators (3)Blower Motors (4)Window Regulators (8)Throttle Bodies (3)Radiator Cooling Fans (6)Fuel Pumps (4)Exterior Door Handles (10)Headlights (9)Tail Lights (13)Radiators (4)Wiper Blades (8)Mass Air Flow Sensors (4)Starter Motors (4)Car Mirrors (10)Door Locks (7)Radiator Hoses (4)Engine Mounts (6)Fog Lights (6)Power Window Switches (4)Wiper Motors (4)Cylinder Head Gaskets (3)All RAV4 sway bar bushings →
Sourcing FAQ — 2018 Toyota RAV4 sway bar bushings
- How much do sway bar bushings for the 2018 Toyota RAV4 cost?
- Verified FOB factory quotes for 2018 Toyota RAV4 sway bar bushings on PartzealHQ currently run $1.60–$1.80 per unit, across 1 verified Chinese supplier covering 6 OEM part numbers. Final pricing depends on specification, order volume and packaging — send one inquiry to collect current quotes.
- What is the minimum order quantity (MOQ) for 2018 Toyota RAV4 sway bar bushings?
- Listed MOQs for these sway bar bushings start at 100 units per SKU. Factories often accept a smaller trial order for first-time buyers at a higher unit price.
- Will these sway bar bushings fit my 2018 Toyota RAV4?
- Every part on this page is matched to the 2018 Toyota RAV4 by OEM fitment data. Before ordering, confirm your exact OEM number, trim and drivetrain on the part page — interchange can vary by trim, engine and build region.
- Rubber or polyurethane stabilizer bushing — and how do I get the right one?
- OE stabilizer bushings are molded rubber sized to an exact bar diameter; polyurethane (PU) versions are firmer, last longer and sharpen turn-in but transmit a little more noise and need periodic greasing. The number that matters is the bar bore — a bushing a millimetre off will clunk or wear fast — so match the exact OEM for your chassis and bar (front and rear differ, and some cars use a left/right-specific bushing). Replace them in pairs with the matching bracket hardware, and use the silicone grease for PU to stop the squeak.