2016 Toyota RAV4 Tie Rod Ends
4 OEM tie rod ends fit the 2016 Toyota RAV4. Each part page lists verified Chinese manufacturers with FOB prices, MOQ and lead times — send one inquiry to collect quotes.
| OEM | Part | Fitment |
|---|---|---|
| 45047-09310 | Tie Rod End Sub-Assembly , Left | Driver Side · Left |
| 45047-49135 | Left Tie Rod End Sub-Assembly | Driver Side · Left |
| 45046-09650 | Right Tie Rod End Sub-Assembly | Passenger Side · Right |
| 45046-49195 | Right Tie Rod End Sub-Assembly | Passenger Side · Right |
More 2016 Toyota RAV4 parts
Brake Rotors (6)A/C Hoses (9)Wheel Bearings (7)Brake Pads (6)Brake Calipers (10)ABS Speed Sensors (6)Master Cylinders (5)Brake Boosters (4)Shock Absorbers (6)Control Arms (5)CV Boots (7)Sway Bar Links (4)Caliper Brackets (8)Air Filters (3)Ball Joints (3)Water Pumps (4)Engine Coolant Thermostats (5)Alternators (4)Drive Belts (4)Spark Plugs (3)CV Axles (16)Cabin Air Filters (3)Sway Bar Bushings (6)A/C Condensers (3)A/C Compressors (8)A/C Evaporators (3)Blower Motors (4)Window Regulators (8)Throttle Bodies (3)Radiator Cooling Fans (6)Fuel Pumps (4)Exterior Door Handles (11)Headlights (11)Tail Lights (20)Radiators (5)Wiper Blades (8)Mass Air Flow Sensors (4)Car Mirrors (10)Door Locks (7)Radiator Hoses (4)Engine Mounts (6)Coolant Reservoirs (3)Fog Lights (10)Power Window Switches (4)Wiper Motors (4)Cylinder Head Gaskets (4)All RAV4 tie rod ends →
Sourcing FAQ — 2016 Toyota RAV4 tie rod ends
- How much do tie rod ends for the 2016 Toyota RAV4 cost?
- Verified FOB factory quotes for 2016 Toyota RAV4 tie rod ends on PartzealHQ currently run $2 per unit, across 1 verified Chinese supplier covering 4 OEM part numbers. Final pricing depends on specification, order volume and packaging — send one inquiry to collect current quotes.
- What is the minimum order quantity (MOQ) for 2016 Toyota RAV4 tie rod ends?
- Listed MOQs for these tie rod ends start at 50 units per SKU. Factories often accept a smaller trial order for first-time buyers at a higher unit price.
- Will these tie rod ends fit my 2016 Toyota RAV4?
- Every part on this page is matched to the 2016 Toyota RAV4 by OEM fitment data. Before ordering, confirm your exact OEM number, trim and drivetrain on the part page — interchange can vary by trim, engine and build region.
- Inner or outer tie rod end — and what makes a good one?
- The outer tie rod end threads onto the inner (rack end) and is the more common wear item; both carry a ball stud in a sealed socket. A good one uses a forged, heat-treated, induction-hardened stud with a low-friction bearing and a tough boot that keeps grease in and grit out — cheap units wear loose and cause wandering steering, uneven tyre wear and a failed alignment. Match the exact OEM for the side and confirm thread pitch and taper, and that the boot and castle-nut/cotter hardware are included.