2015 Chevrolet Silverado A/C Hoses
12 OEM a/c hoses fit the 2015 Chevrolet Silverado. Each part page lists Chinese manufacturers with FOB prices and MOQ — send one inquiry to collect quotes.
| OEM | Part | Fitment |
|---|---|---|
| 15138625 | Hose, A/C Evaporator & Blower Module Drain | — |
| 22967987 | A/C Compressor Hose Assembly | — |
| 22967991 | Hose Assembly, A/C Evap Connect Hose/Tube & Compressor | — |
| 22967992 | A/C Evaporator Tube Assembly | — |
| 23186319 | A/C Compressor Hose Assembly | — |
| 23199182 | A/C Compressor Hose Assembly | — |
| 23357010 | A/C Condenser Hose Assembly | — |
| 23369104 | A/C Condenser Hose Assembly | — |
| 23486543 | A/C Evaporator Tube Assembly | — |
| 84194976 | A/C Condenser Hose Assembly | — |
| 84401906 | Hose Assembly, A/C Cndsr | — |
| 84459872 | A/C Compressor Hose Assembly | — |
More 2015 Chevrolet Silverado parts
Radiator Hoses (6)A/C Condensers (3)Shock Absorbers (18)Brake Pads (8)Water Pumps (4)Brake Rotors (8)Brake Calipers (9)Oxygen Sensors (5)Heater Cores (3)Exterior Door Handles (3)Wheel Bearings (14)Control Arms (11)Sway Bar Links (4)Radiators (8)A/C Compressors (3)Brake Shoes (3)CV Boots (4)Tie Rod Ends (3)Alternators (5)Air Filters (4)Ball Joints (3)Engine Ignition Coils (4)Engine Coolant Thermostats (4)Window Regulators (7)Engine Mounts (7)All Silverado a/c hoses →
Sourcing FAQ — 2015 Chevrolet Silverado a/c hoses
- What is the minimum order quantity (MOQ) for 2015 Chevrolet Silverado a/c hoses?
- Listed MOQs for these a/c hoses start at 50 units per SKU. Factories often accept a smaller trial order for first-time buyers at a higher unit price.
- Will these a/c hoses fit my 2015 Chevrolet Silverado?
- Every part on this page is matched to the 2015 Chevrolet Silverado by OEM fitment data. Before ordering, confirm your exact OEM number, trim and drivetrain on the part page — interchange can vary by trim, engine and build region.
- How do I get the right A/C hose, and what makes a good one?
- A/C line assemblies are specific to the suction, discharge or liquid run and to the chassis and engine, so match the exact OEM — the crimped fittings, tube bends and port orientation differ even between trims, and the wrong line won't seal or route. A good line uses barrier (low-permeation) hose rated for R-134a or R-1234yf with machine-crimped aluminum fittings and fresh O-rings, leak-tested to hold pressure; cheap hoses weep oil at the crimps or permeate refrigerant. When you open the system, replace the O-rings, evacuate properly and recharge with the correct refrigerant and oil.