2017 Chevrolet Trax A/C Hoses
8 OEM a/c hoses fit the 2017 Chevrolet Trax. Each part page lists Chinese manufacturers with FOB prices and MOQ — send one inquiry to collect quotes.
| OEM | Part | Fitment |
|---|---|---|
| 42421348 | Hose, A/C Evaporator Module Drain | — |
| 42588256 | A/C Condenser Hose Assembly | — |
| 95080778 | A/C Condenser Hose Assembly | — |
| 95080779 | Hose Assembly, A/C Cndsr | — |
| 95299470 | A/C Evaporator Hose Assembly | — |
| 95376420 | A/C Compressor Hose Assembly | — |
| 95966490 | HOSE,A/C CMPR | — |
| 95966492 | A/C Compressor Hose | — |
More 2017 Chevrolet Trax parts
Radiator Hoses (6)Brake Pads (3)Brake Rotors (4)Oxygen Sensors (4)Brake Calipers (4)Shock Absorbers (8)Exterior Door Handles (6)Control Arms (4)Wheel Bearings (4)Radiators (3)CV Axles (6)CV Boots (10)Alternators (3)Engine Coolant Thermostats (3)Window Regulators (5)Engine Mounts (5)Wiper Blades (3)All Trax a/c hoses →
Sourcing FAQ — 2017 Chevrolet Trax a/c hoses
- What is the minimum order quantity (MOQ) for 2017 Chevrolet Trax a/c hoses?
- Listed MOQs for these a/c hoses start at 50 units per SKU. Factories often accept a smaller trial order for first-time buyers at a higher unit price.
- Will these a/c hoses fit my 2017 Chevrolet Trax?
- Every part on this page is matched to the 2017 Chevrolet Trax by OEM fitment data. Before ordering, confirm your exact OEM number, trim and drivetrain on the part page — interchange can vary by trim, engine and build region.
- How do I get the right A/C hose, and what makes a good one?
- A/C line assemblies are specific to the suction, discharge or liquid run and to the chassis and engine, so match the exact OEM — the crimped fittings, tube bends and port orientation differ even between trims, and the wrong line won't seal or route. A good line uses barrier (low-permeation) hose rated for R-134a or R-1234yf with machine-crimped aluminum fittings and fresh O-rings, leak-tested to hold pressure; cheap hoses weep oil at the crimps or permeate refrigerant. When you open the system, replace the O-rings, evacuate properly and recharge with the correct refrigerant and oil.