2019 Toyota Corolla Tie Rod Ends
3 OEM tie rod ends fit the 2019 Toyota Corolla. Each part page lists verified Chinese manufacturers with FOB prices, MOQ and lead times — send one inquiry to collect quotes.
| OEM | Part | Fitment |
|---|---|---|
| 45046-09600 | Left Tie Rod End Sub-Assembly | Driver Side |
| 45047-49195 | Tie Rod End Sub-Assembly , Left | Driver Side |
| 45046-49255 | Right Tie Rod End Sub-Assembly | Passenger Side |
More 2019 Toyota Corolla parts
A/C Hoses (7)Brake Pads (4)ABS Speed Sensors (11)Engine Coolant Thermostats (3)Brake Hoses (12)Fuel Pumps (8)Alternators (5)Sway Bar Links (5)Wheel Bearings (10)Control Arms (8)Spark Plugs (3)Air Filters (3)Brake Rotors (6)Brake Calipers (4)Brake Boosters (4)Master Cylinders (6)Caliper Brackets (7)Brake Lines (3)Shock Absorbers (7)CV Boots (9)Radiators (3)Water Pumps (3)CV Axles (6)Drive Belts (5)Cabin Air Filters (4)A/C Compressors (4)Blower Motors (4)Window Regulators (15)Throttle Bodies (3)Radiator Cooling Fans (3)Exterior Door Handles (18)Headlights (9)Tail Lights (9)Wiper Blades (9)Fuel Injectors (8)Mass Air Flow Sensors (4)Camshaft Position Sensors (4)Starter Motors (4)Car Mirrors (7)Radiator Hoses (6)Engine Mounts (6)Crankshaft Position Sensors (4)Power Window Switches (3)Wiper Motors (3)Cylinder Head Gaskets (3)All Corolla tie rod ends →
Sourcing FAQ — 2019 Toyota Corolla tie rod ends
- How much do tie rod ends for the 2019 Toyota Corolla cost?
- Verified FOB factory quotes for 2019 Toyota Corolla tie rod ends on PartzealHQ currently run $2 per unit, across 1 verified Chinese supplier covering 3 OEM part numbers. Final pricing depends on specification, order volume and packaging — send one inquiry to collect current quotes.
- What is the minimum order quantity (MOQ) for 2019 Toyota Corolla tie rod ends?
- Listed MOQs for these tie rod ends start at 50 units per SKU. Factories often accept a smaller trial order for first-time buyers at a higher unit price.
- Will these tie rod ends fit my 2019 Toyota Corolla?
- Every part on this page is matched to the 2019 Toyota Corolla by OEM fitment data. Before ordering, confirm your exact OEM number, trim and drivetrain on the part page — interchange can vary by trim, engine and build region.
- Inner or outer tie rod end — and what makes a good one?
- The outer tie rod end threads onto the inner (rack end) and is the more common wear item; both carry a ball stud in a sealed socket. A good one uses a forged, heat-treated, induction-hardened stud with a low-friction bearing and a tough boot that keeps grease in and grit out — cheap units wear loose and cause wandering steering, uneven tyre wear and a failed alignment. Match the exact OEM for the side and confirm thread pitch and taper, and that the boot and castle-nut/cotter hardware are included.