2016 Toyota Tacoma 空调软管
15 个 OEM 空调软管适配 2016 Toyota Tacoma。每个零件页面均列出中国制造商及其 FOB 价格和起订量 — 一次询盘即可收集多家报价。
| OEM | 零件 | 适配车型 |
|---|---|---|
| 88703-04010 | Toyota Tacoma Discharge Hose Sub-Assembly | — |
| 88703-04020 | Toyota Tacoma Discharge Hose Sub-Assembly | — |
| 88703-04030 | Toyota Tacoma Discharge Hose Sub-Assembly | — |
| 88703-04040 | Toyota Tacoma Discharge Hose Sub-Assembly | — |
| 88703-04050 | Toyota Tacoma Discharge Hose Sub-Assembly | — |
| 88704-04010 | Toyota Tacoma Suction Hose Sub-Assembly | — |
| 88704-04020 | Toyota Tacoma Suction Hose Sub-Assembly | — |
| 88704-04030 | Toyota Tacoma Suction Hose Sub-Assembly | — |
| 88704-04040 | Toyota Tacoma Suction Hose Sub-Assembly | — |
| 88704-04050 | Toyota Tacoma Suction Hose Sub-Assembly | — |
| 88704-04060 | Toyota Tacoma Suction Hose Sub-Assembly | — |
| 88710-04172 | Toyota Tacoma Tube & Accessory Assembly | — |
| 88710-04181 | Toyota Tacoma Tube & Accessory Assembly | — |
| 88710-04202 | Toyota Tacoma Tube & Accessory Ass | — |
| 88710-04500 | Toyota Tacoma Tube & Accessory Assembly | — |
更多 2016 Toyota Tacoma 配件
气缸盖垫片 (6)点火线圈 (3)火花塞 (4)机油滤清器 (3)玻璃升降器 (4)节气门体 (4)燃油泵 (7)外车门把手 (22)前照灯总成 (7)尾灯总成 (12)稳定杆连接杆 (3)空调冷凝器 (5)空调蒸发器 (3)散热器 (8)刹车片 (3)空气滤芯 (3)车轮轴承 (8)交流发电机 (6)附件驱动皮带 (4)制动卡钳 (4)减震器 (11)控制臂 (5)发动机水泵 (3)制动总泵 (6)氧传感器 (3)制动助力器 (3)ABS轮速传感器 (5)稳定杆衬套 (5)制动硬管 (4)雨刮片 (8)曲轴箱通风阀 (4)喷油器 (7)空气流量传感器 (3)凸轮轴位置传感器 (4)起动机 (5)外后视镜 (7)车门锁 (9)离合器片 (3)散热器软管 (7)发动机悬置 (18)曲轴位置传感器 (3)雾灯 (4)电动车窗开关 (11)雨刮电机 (3)制动软管 (5)排气消声器 (6)喇叭总成 (5)发动机油底壳 (8)发动机正时链条 (6)散热器支架 (10)进气歧管 (5)保险杠外皮 (6)All Tacoma 空调软管 →
Sourcing FAQ — 2016 Toyota Tacoma 空调软管
- 2016 Toyota Tacoma 空调软管的最低起订量（MOQ）是多少？
- 这些空调软管的标示起订量低至每个 SKU 50 件。工厂通常会接受首次采购商数量较小的试单，但单价会更高。
- 这些空调软管能适配我的 2016 Toyota Tacoma 吗？
- 本页每个零件均根据 OEM 适配数据与 2016 Toyota Tacoma 匹配。订购前，请在零件页面确认准确的 OEM 编号、配置和驱动系统 — 不同配置、发动机和生产地区的互换性可能不同。
- How do I get the right A/C hose, and what makes a good one?
- A/C line assemblies are specific to the suction, discharge or liquid run and to the chassis and engine, so match the exact OEM — the crimped fittings, tube bends and port orientation differ even between trims, and the wrong line won't seal or route. A good line uses barrier (low-permeation) hose rated for R-134a or R-1234yf with machine-crimped aluminum fittings and fresh O-rings, leak-tested to hold pressure; cheap hoses weep oil at the crimps or permeate refrigerant. When you open the system, replace the O-rings, evacuate properly and recharge with the correct refrigerant and oil.