2018 Toyota Camry Tie Rod Ends
4 OEM tie rod ends fit the 2018 Toyota Camry. Each part page lists verified Chinese manufacturers with FOB prices, MOQ and lead times — send one inquiry to collect quotes.
| OEM | Part | Fitment |
|---|---|---|
| 45470-09180 | Tie Rod End Set | Driver Side |
| 45470-39365 | Tie Rod Set, Left | Driver Side · Left |
| 45460-09280 | End Set, Tie Rod, RH | Passenger Side |
| 45460-80008 | Rod Set, Tie, RH | Passenger Side |
More 2018 Toyota Camry parts
Brake Rotors (8)Brake Calipers (15)Brake Boosters (3)Brake Pads (6)Brake Hoses (9)ABS Speed Sensors (4)Master Cylinders (6)A/C Hoses (17)Caliper Brackets (12)Cylinder Head Gaskets (4)CV Boots (11)Alternators (3)Fuel Pumps (6)Wheel Bearings (7)Radiators (4)Sway Bar Links (4)Shock Absorbers (13)Control Arms (5)Spark Plugs (3)Air Filters (4)Ball Joints (3)Drive Belts (3)CV Axles (7)A/C Condensers (4)A/C Compressors (5)A/C Evaporators (3)Window Regulators (8)Throttle Bodies (4)Radiator Cooling Fans (4)Exterior Door Handles (21)Headlights (7)Tail Lights (13)Wiper Blades (6)PCV Valves (3)Gas Caps (4)Fuel Injectors (6)Camshaft Position Sensors (4)Starter Motors (4)Car Mirrors (13)Vacuum Pumps (6)Radiator Hoses (10)Engine Mounts (3)Crankshaft Position Sensors (3)Coolant Reservoirs (4)Power Window Switches (6)All Camry tie rod ends →
Sourcing FAQ — 2018 Toyota Camry tie rod ends
- How much do tie rod ends for the 2018 Toyota Camry cost?
- Verified FOB factory quotes for 2018 Toyota Camry tie rod ends on PartzealHQ currently run $2 per unit, across 1 verified Chinese supplier covering 4 OEM part numbers. Final pricing depends on specification, order volume and packaging — send one inquiry to collect current quotes.
- What is the minimum order quantity (MOQ) for 2018 Toyota Camry tie rod ends?
- Listed MOQs for these tie rod ends start at 50 units per SKU. Factories often accept a smaller trial order for first-time buyers at a higher unit price.
- Will these tie rod ends fit my 2018 Toyota Camry?
- Every part on this page is matched to the 2018 Toyota Camry by OEM fitment data. Before ordering, confirm your exact OEM number, trim and drivetrain on the part page — interchange can vary by trim, engine and build region.
- Inner or outer tie rod end — and what makes a good one?
- The outer tie rod end threads onto the inner (rack end) and is the more common wear item; both carry a ball stud in a sealed socket. A good one uses a forged, heat-treated, induction-hardened stud with a low-friction bearing and a tough boot that keeps grease in and grit out — cheap units wear loose and cause wandering steering, uneven tyre wear and a failed alignment. Match the exact OEM for the side and confirm thread pitch and taper, and that the boot and castle-nut/cotter hardware are included.