2020 Toyota Corolla Tie Rod Ends
4 OEM tie rod ends fit the 2020 Toyota Corolla. Each part page lists Chinese manufacturers with FOB prices and MOQ — send one inquiry to collect quotes.
| OEM | Part | Fitment |
|---|---|---|
| 45046-09A00 | Tie Rod End Set | — |
| 45047-09430 | Tie Rod End Set | — |
| 45047-49195 | Tie Rod End Sub-Assembly , Left | Driver Side |
| 45046-49255 | Right Tie Rod End Sub-Assembly | Passenger Side |
More 2020 Toyota Corolla parts
Brake Pads (6)A/C Hoses (15)ABS Speed Sensors (11)Brake Hoses (8)Fuel Pumps (10)Alternators (5)Sway Bar Links (4)Wheel Bearings (11)Control Arms (6)Spark Plugs (5)Air Filters (3)Brake Rotors (10)Brake Calipers (6)Master Cylinders (5)Caliper Brackets (11)Brake Lines (3)Shock Absorbers (14)CV Boots (13)Radiators (9)Water Pumps (4)CV Axles (8)Drive Belts (3)Cabin Air Filters (3)Sway Bar Bushings (4)A/C Condensers (6)A/C Compressors (5)A/C Evaporators (3)Window Regulators (10)Throttle Bodies (5)Radiator Cooling Fans (6)Exterior Door Handles (9)Headlights (15)Tail Lights (6)Wiper Blades (5)PCV Valves (3)Gas Caps (3)Fuel Injectors (6)Camshaft Position Sensors (4)Coolant Temperature Sensors (3)Starter Motors (5)Car Mirrors (10)Vacuum Pumps (4)Radiator Hoses (14)Engine Mounts (7)Crankshaft Position Sensors (4)Coolant Reservoirs (3)Power Window Switches (9)Wiper Motors (3)Intake Manifolds (5)Cylinder Head Gaskets (5)Exhaust Mufflers (6)Horn Assemblies (4)Engine Oil Pans (4)Engine Timing Chains (6)Radiator Supports (6)Bumper Covers (12)All Corolla tie rod ends →
Sourcing FAQ — 2020 Toyota Corolla tie rod ends
- What is the minimum order quantity (MOQ) for 2020 Toyota Corolla tie rod ends?
- Listed MOQs for these tie rod ends start at 50 units per SKU. Factories often accept a smaller trial order for first-time buyers at a higher unit price.
- Will these tie rod ends fit my 2020 Toyota Corolla?
- Every part on this page is matched to the 2020 Toyota Corolla by OEM fitment data. Before ordering, confirm your exact OEM number, trim and drivetrain on the part page — interchange can vary by trim, engine and build region.
- Inner or outer tie rod end — and what makes a good one?
- The outer tie rod end threads onto the inner (rack end) and is the more common wear item; both carry a ball stud in a sealed socket. A good one uses a forged, heat-treated, induction-hardened stud with a low-friction bearing and a tough boot that keeps grease in and grit out — cheap units wear loose and cause wandering steering, uneven tyre wear and a failed alignment. Match the exact OEM for the side and confirm thread pitch and taper, and that the boot and castle-nut/cotter hardware are included.